Garage Floor Resurfacing

Garage Floor Resurfacing

If you are interested in garage floor resurfacing, then you have come to the right place. Here, you will find an excellent procedure and a guideline for garage floor resurfacing. Read this out if you have to do it on your own. These guidelines will get you the best results out of your floor.

Step 1: prepare the floor surface:

First of all, you need to prepare the surface which is to be treated by you. Check if you have any large, profound blows that run over the lump, or if the surface starts to crumble into slight bits of sand or dust? On the other hand, some serious problems can also occur to your floor. So, you have to prepare your floor to get it treated.

If you have minor cracks on the floor, then you need to spend less time on it. After preparing your floor, you need to make the mixture.

Step 2: clean the surface:

Now, before applying some mixture on the floor, you need to wash it with the help of a water pipe. Make sure that the water comes with the pressure. Most of the professionals suggest power washing of the floor with 3, 500 psi. In addition to that, you must not forget to remove any nail, paint or stain from the floor. If this method is not working, you may ask the expert to deal with it for you. You will easily find a floor washer.

Step 3: Mix the solution:

In this step, you have to mix and prepare the solution according to the needs of the floor. For instance, if your floor is cracked or of it contains deep holes, then you must make a thick solution. In addition to that, you need to make sure that the temperature is perfect for such kind of work.

In order to make the solution, all you need to do is to pour 5 gallons of water in a bucket. Now, mix the contents and stir it until it becomes disappear in the water. You can also add the product if it will not solve your problem.

Step 4: Make it dry:

In the next step, you have to wet the surface with the help of the hose. But, you need to keep this thing in mind that all the standing water in the garage should be cleaned off from the surface. These are the few things which you need to take care of in garage floor resurfacing.

Step 5: Apply the mixture:

Finally, you will now apply the mixture on the surface. Check if the results are according to your needs. At first, try to spread it equally. Make it even from all sides. It should be smooth and glossy from its appearance.

Share this post